Description
- INSTANT REASSURANCE YOUR ELECTRIC FENCE IS WORKING – Place the Electric Fence Indicator light permanently on your fence line and simply simply look for the flash (flashes with each pulse of the energizer) when you pass by.
- HIGHLY VISIBLE LED LIGHT – The LED light flashes to indicate the fence is working effectively. Easily visible during day & night (up to 0.62 miles at night). Install the line indicator at strategic locations including driveways for convenient visibility.
- LOW VOLTAGE CUT OFF – The Live Fence Indicator is designed to stop flashing if the fence voltage is too low. If the voltage drops below 2000V, the Live Fence Indicator will stop flashing altogether.
- QUICK & EASY INSTALLATION – Simply push the ground stake into the ground and clip the device onto your electric fence wire or tape (up to 1.58“ width).
- NO BATTERIES REQUIRED – This live wire voltage indicator utilizes power from the fence so no batteries are needed. The Electric Fence Indicator light is water and UV resistant for durability.
Features
Indicates power on the fence for peace of mind
• Visible from up to 1km at night and 100m during the day
• No batteries required
• Uses minimal power from the fence
• The frequency of the flashing LEDs indicates the amount of energy on the fence. The longer the period between flashes, the lower the voltage on the fence
• Highly visible LEDs allow for a 160-degree viewing angle. This allows the light to shine into the secure area only
• Can operate from 0.9kV to 12kV
• Can be used with most electric fence energizers.
The fence light flashing rate changes with the change of voltage on the fence. The slower the rate the lower the voltage.
The intensity of the light remains the same so it can be seen from far irrespective of the fence voltage.
It is installed between the earth and live wire to indicate the status and condition of the fence for peace of mind.
